Changing Form Length
Example: Changing Form Length Using the Menu System
If you wanted to change the Form Length from the default of 66 lines to 65 lines, this is how you do it:
1.Make sure your printer is in an Offline state. If it's not, toggle the Online key.
2.Press the Menu key. The display reads:
3.Press Enter to select the Operator menu and press the down arrow key until you see Forms. The display reads:
4.Press the Enter key to select Forms. Press the down arrow key until the display reads Length (lines):
5.Forms Length (lines) is the selection you want, so press the Enter key. The display reads:
(The asterisk means that 66 is the current selection, see page
6.You want to change this to 65. Press the Down arrow once and the display reads:
