3–54 Operator Manual
Config Menu
⇒
Printer
Beeper Mode
When a fault event occurs, the beeper will sound. There are two options: Single
or Persistent. In the Single mode, each fault event will cause the fault alert
beeper to produce just one short-duration audio tone and then to remain
silent. In the Persistent mode, a fault event will cause the fault alert beeper to
periodically produce a short-duration audio tone that cycles approximately
once per second and will persist until the operator clears the fault.
Beeper Volume
Here the user selects the loudness of the audio tone produced by the fault alert
beeper. The options are Silent, Low, Medium – the default, or High. Pressing
the Enter key will produce a short sample tone that corresponds to the option
selected.