Installation | TANDBERG Director Videoconferencing System |
|
|
2.Remove the four caps and plugs from the mounting arm at the location where you want to mount the shelf. Feed the cables for the videoconferencing camera through the large hole, down the channel and through the lower mounting point.
N O T E
CABLES SHOWN MAY NOT MATCH THOSE REQUIRED BY YOUR VIDEOCONFERENCING CAMERA.
3.If you’re installing the mounting arm on the same side as the IR receiver, detach the receiver and leave it temporarily dangling. Carefully slide the mounting arm onto the side of the cabinet, ensuring that the cables remain in the channel and are not pinched.
18
