Advanced Use

TANDBERG Director Videoconferencing System

 

 

You can test the different subsystems of your videoconferencing equipment.

Far End Loop (ISDN only)

SETLOCAL

This system will loop all

 

incoming audio and video.

 

- The far end will see its own

 

video and hear its own audio.

 

- The local side will see and hear the far end.

An on-screen indicator will indicate ‘Local Loop’.

REQUESTREMOTE A request will be sent to set the far end in loop.

-The far end will see and hear the local side (varies depend-

ing on implementation of loop functionality).

-The local side will see its own video and hear its own audio (if the far end supports loop).

If ‘Far End Loop’ is set to ‘RequestRemote’ while in a call and the call is subsequently disconnected, ‘Far End Loop’ will be set to ‘Off’.

System Selftest

The system performs a check to determine internal hardware integrity. Test Network is useful when you want to check if your network connection is active.

View Current Settings

This window will display all the system settings. Use the arrow key on the remote control to scroll through the list.

Restore defaults

You may restore all system settings to the factory default using this function.

N O T E

THIS DEFAULT SETTING WILL NOT

AFFECT YOUR CALL DIRECTORY

INFORMATION, NETWORK TYPE,

LINE SETUP NUMBERS OR YOUR

SPID NUMBERS

94

Page 94
Image 94
TANDBERG D5016402 user manual Restore defaults, Far End Loop Isdn only, System Selftest, View Current Settings