TANDBERG Director Videoconferencing System

Appendix

 

 

Appendix 4: Environmental & operational considerations

Guidelines for Optimal Videoconferencing Environments

The following are a set of guidelines to consider when either building a videoconferencing room, or using an existing room for videoconferencing.

LIGHTING

-Low Contrast desired for light intensity.

-No dark spots.

-Intensity @ table 800 - 1400 Lux as measured with an Incident light meter.

-Intensity @ back wall: minimum ˚ of that measured at table, Max of that measured at table.

-Color temperature: Depends upon wall color and camera.

-Typically 3200 - 3600 degrees Kelvin

-Block sunlight from entering room.

SEATING AREA (TABLE)

-Should allow all participants to see Monitors.

-Should allow camera to “see” all participants.

-Should allow participants to see each other.

-Should allow 3 linear feet for each participant.

-Non-shiny non-patterned preferably light grey surface (if table used).

WALLS

-Color: Depends on participants skin tones, cameras, and lighting. Generally high contrast color desired . Light blue is commonly used.

-Acoustically reflective surfaces (such as glass or concrete) should be covered with curtains or sound treatment.

AUDIO

-Noise Floor Maximum 50dBC.

-Noise Floor preferred less than 44dBC.

-Reverb Time .3 to .5 sec.

-Absorption Coefficient .25 to .45.

-No flutter echoes.

VENTILATION

-Keep in mind Noise Floor.

-300W (1024 BTU/HR) per person.

-400W (1365 BTU/HR) for equipment.

-Intake and exhaust should be located near equipment.

-Velocity = Noise. Therefore keep velocity of air low.

MONITOR SIZE

-Optimal distance from monitor for viewing people is about 7.5 x monitor size.

-Optimal distance from monitor for viewing documents is about 3.25 x monitor size.

-Viewing Angle: 45 degrees off axis maximum.

ROOM

-Should be located away from noise

-Should not have windows

-Doors should be located off camera - A “diamond” shape gives best viewing angles, camera angles, and can seat the most people.

LIGHTING

 

Type

Temp

Bright Daylight near equator

10 000K to 30 000K

Metal Halide Lamp

10 000K

Verilux Reptile Daylight

6 500K

Daylight White Fluorescent

6 300K

Verilux Full spectrum Fluor

6 280K

Verilux Reptile D-light

5 600K

Average Daylight

5 500K

Cool White

4 200K

Lite White

4 150K

3500K Fluorescent

3 500K

Warm White

3000-3200K

100W Light bulb

2 850K

Candlelight

1 900K

Source

Intensity

Sunlight

30 000 to 100 000Lux

TV Studio

2000Lux

Average office

400Lux

By my Computer

600Lux

Moonlight

1Lux

Note: As measured with an incident light meter.

99

Page 99
Image 99
TANDBERG D5016402 user manual Appendix 4 Environmental & operational considerations