TANDBERG Director Videoconferencing System | Advanced Use |
|
|
Audio Settings
Audio Inputs
By default, all inputs are enabled. Just plug in an audio source and it is active. Audio inputs that are ‘On’ will automatically be mixed. Select ‘Off’ to prevent audio/noise from unused inputs or if you want to disable a specific input. The activated audio sources are stored on presets.
Mic1, Mic2 and Mic3 are intended for electret type microphones. The microphone inputs are balanced with 24V phantom power.
Audio4 is intended for connection to an external microphone amplifier or an external fixed mixer.
Audio5 is intended for connection to external playback devices or to telephone
As there is no acoustic echo canceller on this input it should not be connected to any microphones. The audio entering this input will be heard from the local speaker.
N O T E
EXTERNAL MIXER
WHEN USING AN EXTERNAL MIXER, IT IS VERY IMPORTANT THAT THIS IS A FIXED MIXER. AUTOMATIC, SMART AND OTHER TYPES OF ADAPTIVE MIXERS MIGHT CAUSE THE ECHO CANCELLER TO MALFUNCTION.
Audio6 is intended for connection to a VCR. It can also be connected to other external playback devices. As there is no acoustic echo canceller on this input it should not be connected to any microphones. The audio entering this input will be heard from the local speaker. If ‘Auto’ is selected, the audio from the VCR will only be heard when VCR is selected as videosource.
63
