TANDBERG Director Videoconferencing System | Installation |
|
|
System Options
The SYSTEM OPTIONS button allows for limited modification of setup of the codec. Modification of these setting from the default values may affect the operation of the Director system. The main item of note is the ‘Camera Model’ setting. The system supports VISCA controlled cameras and therefore is selectable between the W.A.V.E II and VISCA controlled cameras. VISCA cameras would use the Aux 1 Output on the Director Rear Interface Panel.
N O T E
IF CONNECTING TWO CAMERAS, THEY MUST BE IDENTICAL - YOU CANNOT HAVE ONE WAVE II CAMERA AND ONE SONY CAMERA. THEY MUST BOTH BE WAVE II CAMERAS OR BOTH BE A VISCA CONTROLLABLE CAMERA OF THE SAME MAKE AND MODEL.
Edit Directory
Allows the user to enter and edit directory entries for the Director system. First, update the directory by following the instructions below. Then select the ‘Add New Entry’ button to add a new directory entry, or select an existing directory entry to edit that information. Refer to ‘VIDEOCONFERENCE OPERATION’ > ‘EDITING SPEED DIAL DIRECTORY’ for more information.
Update Directory
Click UPDATE DIRECTORY to set the initial directory placeholders that will be negotiated between the codec and control device for the Director system. Any time the codec directory is updated with new or modified entries through any other method than using the EDIT DIRECTORY method discussed above (i.e. Codec Data port, Web browser, Telnet, or TMS), the control device should be “synchronized” with the updates made in the codec by clicking UPDATE DIRECTORY on the TOOLS screen to have the latest modifications displayed.
25
