TANDBERG Director Videoconferencing System
Important Information
Please review this manual and the REAR PROJECTION SMART BOARDTM 3000i INSTALLATION GUIDE carefully before setting up and using the Director videoconferencing system. With proper care, your system should provide years of
WARNING: THE PROJECTOR INSIDE THE CABINET IS A
NOT STARE INTO THE BEAM OF LIGHT OR VIEW IT DIRECTLY. PREVENT CHILDREN FROM STARING
DIRECTLY INTO THE BEAM OF LIGHT.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
WARNING FOR EUROPEAN CUSTOMERS:
THE 3000i SHOULD ONLY BE USED WITH EUROPEAN TN AND TT POWER DISTRIBUTION SYSTEMS.
THE 3000I IS NOT SUITABLE FOR OLDER,
EUROPEAN COUNTRIES. “THIS SYSTEM
SOME INSTALLATIONS IN FRANCE, WITH IMPEDANCE TO EARTH, AT 230/400V, AND IN NORWAY,
WITH VOLTAGE LIMITER, NEUTRAL NOT DISTRIBUTED, AT 230V
CONTACT QUALIFIED PERSONNEL IF YOU’RE UNCERTAIN OF THE TYPE OF POWER SYSTEM
AVAILABLE WHERE YOU’RE INSTALLING YOUR 3000I.
Other Warnings and Safety Precautions
For operating safety and to avoid damage to the unit, follow these instructions.
•Move the cabinet with care. Quick stops, excessive force and uneven surfaces can overturn the cabinet.
•When you transport the Director, only ship the cabinet in the upright position and never lay the interactive whiteboard face down. In addition, ensure that the projector is secure by tightening the projector adjustment knob, locking bolt and two shipping straps.
•If you transport the Director over a distance, we strongly urge you to completely repackage it using the original packaging. This packaging for the Director was designed with optimal shock and vibration protection. If the original packaging is no longer available, pack all components with as much padding as reasonably possible to ensure that they are not exposed to excessive vibration or shock.
•If cabinet assembly is required, we strongly recommend that at least two people perform this task.
•Do not touch the rear surface of the interactive whiteboard or apply isopropyl alcohol, water or acetone. If any of these fluids come into contact with this surface, the diffusion coating on the rear of the interactive whiteboard will be damaged, resulting in a permanent deterioration in display quality.
4
