TANDBERG Director Videoconferencing System

Advanced Use

 

 

SNMP Settings

SNMP Trap Host

SNMP (Simple Network Management Protocol) is used for monitoring and configuring of different units in a network. The codec’s SNMP Agent responds to requests from SNMP Managers (a PC program etc.). SNMP traps are generated by the agent to inform the manager about important events.

SNMP Trap Host identifies the IP-address of the SNMP manager.

Traps can be sent to multiple SNMP Trap Hosts. Enter the IP address of up to three SNMP managers. All traps will then be sent to the hosts listed.

SNMP Community

SNMP Community names are used to authenticate of SNMP requests. SNMP requests must have a ‘password’ in order to receive a response from the SNMP agent in the codec.

N O T E

THE SNMP COMMUNITY NAME IS CASE SENSITIVE.

Call Settings

Incoming MCU calls

ON

When you are in a call, the system will provide a visual/audio indication of an

 

incoming call and ask you to accept/reject the call.

OFF

The system will not accept incoming calls when you are in a call.

87

Page 87
Image 87
TANDBERG D5016402 user manual Call Settings, Snmp Settings, Incoming MCU calls, Snmp Trap Host, Snmp Community