TANDBERG D5016402 user manual Advanced H.323 Settings

Models: D5016402

1 116
Download 116 pages 15 Kb
Page 84
Image 84

Advanced Use

TANDBERG Director Videoconferencing System

 

 

Advanced H.323 Settings

N O T E

THESE SETTINGS ONLY HAVE AN EFFECT IF THEY ARE SUPPORTED BY YOUR IP INFRA STRUCTURE.

RSVP (Resource Reservation Protocol)

AUTORSVP enables the endpoints to request the optimal amount of bandwidth for the duration of an IP video conference.

OFF

RSVP is switched off.

NAT (Network Address Translation)

NAT is used in small LAN’s, often home offices, when a PC and a videoconferencing system is connected to a router with NAT support. NAT support in the videoconferencing system enables proper exchange of audio/video data when connected to an external videoconferencing system (when the IP traffic goes through an NAT router.

When NAT is ‘On’, the NAT Server Address will be shown in the startup-menu: ‘My IP Address: 10.0.2.1 (NAT)’

NAT Address

This must be the external/global IP-address to the Router with NAT support. Packets sent to the Router will then be routed to the codec.

In the router, the following ports must be routed to the codec’s IP-address: Port 1720

Port 5555-5560

Port 2326-2365

Please contact your TANDBERG representative for further information.

QoS Type

 

OFF

No QoS is used

DIFFSERV

Diffserv QoS method is used. Please see below for details.

IP PRECEDENCE

IP Precedence QoS method is used. Please see below for details.

84

Page 84
Image 84
TANDBERG D5016402 user manual Advanced H.323 Settings