TANDBERG Director Videoconferencing System

Advanced Use

 

 

VNC Settings

Address

The IP-address of the PC with the VNC software installed. To find the IP-address of the PC, select ‘Command Prompt’ from the Windows Start menu. Type ‘ipconfig’ and press ENTER.

Display Number

The display number for VNC is 0 and upwards. If you are using WinVNC, double- click on the icon on the toolbar to view ‘WinVNC properties’. This number should correspond with ‘Display Number’ in this menu.

Password

N O T E

VNC SERVER SOFTWARE SETUP

BOTH THE PC AND THE VIDEOCONFERENCING SYSTEM MUST BE CONNECTED TO THE SAME LAN.

A VNC SERVER MUST BE INSTALLED ON THE PC. FREE SOFTWARE CAN BE DOWNLOADED FROM HTTP://WWW.UK.RESEARCH.ATT.COM/VNC

INSTALL THE SOFTWARE BY RUNNING THE DOWNLOADED FILE.

TO CONFIGURE THE VNC SERVER SOFTWARE:

-SELECT “ACCEPT SOCKET CONNECTIONS”.

-SELECT “AUTOFOR “DISPLAY NUMBER”.

‘DISPLAY NUMBERIN THE SYSTEM MUST THEN HAVE THE VALUE 0.

-ENTER A PASSWORD IN THE “PASSWORD”-FIELD. MUST CORRESPOND WITH THE ‘VNC SETTINGSON YOUR SYSTEM.

Enter the same password as specified in WinVNC properties. The password will be shown as asterisk signs (*) the next time you enter the menu.

Start using VNC

To activate VNC, press PC on the remote control. Please make sure that ‘PC’ is set to ‘VNC’ in the ‘Video Settings Menu’. See also ‘PC SOFTPRESENTER’ section for further information.

71

Page 71
Image 71
TANDBERG D5016402 user manual VNC Settings, Address, Display Number, Password, Start using VNC