TANDBERG Director Videoconferencing System

Getting Started

 

 

Network and LAN Settings

ISDN configuration

For each installation of the system it is necessary to configure the unit. All configuration parameters are available via the menu system. If you are using an external IMUX or special networks, the external equipment may also need to be configured.

Press MENU on the IR control. Select the menu ‘TERMINAL SETTINGS’ > ‘NETWORK.

Set ‘Current Network’ to the network you want to use.

Specify the settings for the selected network in one of the menus.

For details, follow the instructions in ‘TERMINAL SETTINGS’ > ‘NETWORK CONFIGURATIONin this manual.

For further information refer to the examples in:

APPENDIX 1: CONNECTING THE SYSTEM TO ISDN USING NT1 NETWORK ADAPTERS

APPENDIX 2: CONNECTING THE SYSTEM TO THE SWITCHED 56 NETWORK

LAN configuration

Press MENU on the remote control. Select the menu ‘Terminal Settings’ > ‘LAN Settings’.

Specify the necessary LAN settings according to the instructions from your LAN administrator. If there is an H.323 Gatekeeper present on your LAN, see also ‘H.323 Settings’.

For details, follow the instructions in chapter ‘LAN SETTINGS’ in this manual.

35

Page 35
Image 35
TANDBERG D5016402 user manual Network and LAN Settings, Isdn configuration, LAN configuration