Maintenance
AWG510 & AWG520 Service Manual 6-5
Inspection Ċ Exterior. Inspect the outside of the generator for damage, wear, and
missing parts, using Table 6–2 as a guide. Waveform generators that appear to
have been dropped or otherwise abused should be checked thoroughly to verify
correct operation and performance. Immediately repair defects that could cause
personal injury or cause further generator damage.
Table6-2: External Inspection Check List
Item Inspect For Repair Action
!
!
Cleaning Procedure Ċ Exterior.Do the following steps to clean the waveform
generator exterior:
1. Remove loose dust on the outside of the generator with a lint free cloth.
2. Remove remaining dirt with a lint free cloth dampened in a general purpose
detergent-and-water solution. Do not use abrasive cleaners.
3. Clean the light filter protecting the monitor screen with a lint-free cloth
dampened with either ethyl alcohol or, preferably, a gentle, general purpose
detergent-and-water solution.
To prevent getting moisture inside the generator during external
cleaning, use only enough liquid to dampen the cloth or applicator.