Specifications
AWG510 & AWG520 Service Manual 1-11Table1-13: Digital data out (option 03) (Cont.)Characteristics6PV reference pageDescription
Delay
Data to marker 4.4 ns
See Figure 1-2 for Td5.
Clock to data 3.7 ns
See Figure 1-2 for Td6.
6The characteristics are specified at the end of the SMB-BNC cable (012Ć1459Ć00).
Table1-14: Auxiliary inputs Characteristics Description PV reference page
Triggerinput 7
Connector Rear panel BNC connectors
Impedance 50 W"2W
1kW"100 W
Polarity POS (positive) or NEG (negative)
Input voltage range "10V,intoa1kWload
"5V,intoa50W load
Threshold
Level -5.0 V to 5.0 V
Resolution 0.1 V
* Accuracy "(5 % of level + 0.1 V) Page ****
Pulse width Minimum 10 ns, 0.2 V amplitude
Triggerdead time Maximum 500 ns
Triggerjitter Maximum 1.6 ns
Gate jitter Maximum32 clocks
Delay to marker,Typical 30ns + 1 clock
See Figure 1-2 for Td2
Delay to data, Typical
TRIGGER mode 37 ns + 1 clock
See Figure 1-2 for Td1.
GATEmode Minimum 45 ns + 358.5 clocks
Miaximum 45 ns + 430.5 clocksĂ
Event trigger input
Connector 9Ćpin, D type on the rear panel
Number of events 4 bits
Input signal 4 event bits and Strobe