Tektronix AWG520, AWG510 - page 72

Performance Verification
 AWG510 & AWG520 Service Manual
Each procedure consists of as many steps, substeps, and subparts as required
to do the test. Steps, substeps, and subparts are sequenced as follows:
1. First Step
a. First Substep
First Subpart
Second Subpart
b. Second Substep
2. Second Step
Instructions for menu selection on follow this format: FRONT PANEL
BUTTONMain Menu ButtonSide Menu Button. For example, “Push
UTILITYSystemReset to FactoryOK”
In steps and substeps, the lead-in statement in italics instructs you what to
do, while the instructions that follow tell you how to do it, as in the example
step below, “Initialize the AWG500-Series Waveform Generator controls”
by doing “Push UTILITY (front panel)System (bottom)Reset to
Factory (side)OK (side). Now, push the front panel menu button...”.
Where instructed to use a front-panel button or knob, or select from a bottom
or side menu, the name of the button or knob appears in boldface type: “push
EDIT; then Drive..., push Floppy side button and use the knob to select the
waveform file SINE.WFM from the file list.”
. The symbol at the left is accompanied by information you must read to do
the procedure properly.