AWG510 & AWG520 Service Manual 1-3
Specifications
This section contains the AWG510 and AWG520 Arbitrary Waveform Generator
specifications. All specifications are guaranteed unless labeled “typical”. Typical
specifications are provided for your convenience but are not guaranteed.
Specifications that are marked with the n asterisk (*) symbol in the column
Characteristics are checked in Appendix B: Performance Verification and the
page number referenced to the corresponding performance verification proce-
dures can be found in the column PV reference page.
The characteristics in the specifications are listed in tables that are divided into
categories. In these tables, the subcategories may also appear in boldface under
the column Characteristics.
The performance limits in this specification are valid with these conditions:
HThe Waveform Generator must have been calibrated/adjusted at an ambient
temperature between +20_ C and +30_ C.
HThe Waveform Generator must be in an environment with temperature,
altitude, humidity, and vibration within the operating limits described in
these specifications.
HThe Waveform Generator must have had a warm-up period of at least 20
minutes.
HThe Waveform Generator must be operating at an ambient temperature
between +10_ C and +40_ C.

Performance Conditions