Removal and Installation Procedures
AWG510 & AWG520 Service Manual 6-11
Equipment Required. Most modules in this generator can be removed with a
screwdriver with a size #2, Phillips tip. Use this tool whenever a procedure step
instructs you to remove or install a screw unless a different size screwdriver is
specified in that step. All equipment required to remove and reinstall a module
are listed in the first step of each procedure.
Table6-4: Tools required for module removal
Item
No. Name Description
TektronixPart
Number
1 Screwdriverhandle Accepts Phillips-driver bits
2 #1 Phillips tip Phillips-driver bit for #1 screw size
3 #2 Phillips tip Phillips-driver bit for #2 screw size
4 Flat-bladescrewdriver Screwdriver for removing standard-
headed screws
5 Needle-NosePliers Standard tool
6 Nutdriver,1@2inch Standard tool
7 Nutdriver,5 mm Standard tool
8 Nutdriver,7 mm Standard tool
9 RetainingRing Plier s Standard tool
10 AngleĆTip Tweezers Standard tool
11 Soldering Iron Standardtool
12 Pliers Standard tool
13 Solder Wick Standard tool
14 Adhesive TRAĆCON: TraĆBond #BAĆ2114