Tektronix AWG520, AWG510 1-6 AWG510 & AWG520 Service Manual, Table1-6: Main output (Cont.)

Specifications
1-6 AWG510 & AWG520 Service Manual
Table1-6: Main output (Cont.)
Characteristics3PV reference pageDescription
Normal out
Output voltage -2.0 V to +2.0V,into a 50 Wload
Amplitude
Range 20 mVp-p to2V
p-p,intoa50Wload
Resolution 1mV
* DC accuracy "(1.5 % of amplitude + 2 mV), offset: 0 V Page 4-32
Offset
Range -1.000 V to 1.000 V, into a 50 Wload
Resolution 1mV
* Offset accuracy "(1 % of offset + 10 mV),
20 mV amplitude (waveform data: 0)
Page 4-32
Reverse power protection Upto 0.4 W
* Pulse response (Waveform data: -1 and 1, offset: 0 V, and filter: through) Page 4-40
Rise time (10 % to 90 %) x2.5ns (amplitude u1.0 Vp-p)
x1.5 ns (amplitude x1.0 Vp-p)
Fall time (10 % to 90 %) x2.5 ns (amplitude u1.0 Vp-p)
x1.7 ns (amplitude x1.0 Vp-p)
* Aberration (500 MHz Bandwidth)
"10 % (amplitude u1.0 Vp-p)
"7 % (amplitude x1.0 Vp-p)
Page 4-40
* Flatness "3 % (after 50 ns from rise and fall edges) Page4-40
Small signal bandwidth,Typical 300 MHz (-3 dB, amplitude fixed to 0.5 V)
* Sinewave characteristics
(CH1 and CH2)
(Clock: 1 GHz, waveform points: 32, frequency: 31.25 MHz,
amplitude: 1.0 V,offset: 0 V, filter: through)
Page 4-43
Harmonics x-50 dBc (DC to 400 MHz)
Noise x-53 dBc (DC to 400 MHz)
Phase Noise x-90 dBc / Hz (10 kHz offset)