Specifications

AWG510 & AWG520 Service Manual 1-17

Certification and Compliances

The certification and compliances for the AWG510 and AWG520 Arbitrary

Waveform Generator are listed in Table 1–23.

Table1-23: Certifications and compliances

EC declaration of conformity -
EMC
Meets intent of Directive 89/336/EEC for Electromagnetic Compatibility.Compliance was
demonstrated to the following specifications as listed in the Official Journal of the
EuropeanCommunities:
EMC Directive 89/336/EEC:
EN 55011 Class A Radiated and Conducted Emissions
EN 50081Ć1 Emissions:
EN 61000Ć3Ć2 AC Power Line Harmonic Emissions
EN 50082Ć1 Immunity:
EN 61000Ć4Ć2
EN 61000Ć4Ć3
EN 61000Ć4Ć4
EN 61000Ć4Ć5
EN 61000Ć4Ć6
EN 61000Ć4Ć8
EN 61000Ć4Ć11
Electrostatic Discharge Immunity
RF Electromagnetic Field Immunity
Electrical Fast TransientImmunity
Surge Immunity
Conducted Disturbances Induced by RF Fields
Power Frequency Electromagnetic Field
VoltageDips and Interruption Immunity
EC Declaration of Conformity - Low
Voltage
Compliance was demonstrated to the following specification as listed in the OfficialJournal
of the European Communities:
Low VoltageDirective 73/23/EEC, amended by 93/68/EEC
EN61010Ć1/A2:1995 Safetyrequirements for electrical equipment for measureĆ
ment, control, and laboratory use
FCCcompliance FCC Code of Federal Regulations, 47 CFR, Part 15, Subpart B, Class A
Australian/New Zealand declaration of
Cf C
Complies with EMC provision of Radio-communications Act per the following standard:
Conformity Ć EMC AS/NZS 2064.1/2 Industrial, Scientific, and Medical Equipment: 1992
Approvals Complies with the following safety standards:
UL3111-1,First Edition Standardfor electrical measuring and test equipment.
CAN/CSA C22.2No.1010.1Ć92 Safety requirements for electrical equipment for
measurement, control and laboratory use.