Preparation for Use
2-8 AWG510 & AWG520 Service Manual
Repackaging Instructions
Use a corrugated cardboard shipping carton having a test strength of at least
375 pounds and with an inside dimension at least six inches greater than the
instrument dimensions.
If the instrument is being shipped to a Tektronix Service Center, enclose the
following information: the owner’s name, address, phone number of a contact
person, type and serial number of the instrument, reason for returning, and a
complete description of the service required.
Seal the shipping carton with an industrial stapler or strapping tape.
Mark the address of the Tektronix Service Center and also your own return
address on the shipping carton in two prominent locations.
Installed Options
Your instrument may be equipped with one or more instrument options. Except
for the line-cord options described in Table 2–2 (on page 2–4 of this section), all
options and optional accessories are listed and described in Section 7, Options.
For further information and prices of instrument options, refer to your Tektronix
Products catalog or contact your Tektronix Field Office.