Removal and Installation Procedures
6-26 AWG510 & AWG520 Service Manual
4. Further disassembly of front-panel assembly: If the front panel or the
front-panel buttons are to be serviced, do the following substeps:
a. Remove the front-panel control knobs from the front-panel assembly
using the method described in Front-Panel Knobs on page 6–18.
b. Remove the eight screws mounting the front-panel board to the front
panel.
c. Now hand disassemble the front-panel assembly components using
Figure 6–10 as a guide. Reverse procedure to reassemble, again using
Figure 6–10 as a guide.
Figure 6-10: Disassembly ofFrontĆPanel Assembly