2
2-26 BASIC OPERATION

9. SENDING ORIGINALS (DIRECT TX) (Cont.)

On-hook Transmission
Originals are sent in the direct TX mode regardless of the memory TX/direct TX setting in the transmission
mode setting.
In this mode, you can confirm the answering tone from the remote FAX.
2Place the original.
For details on how to place originals on the original glass.
( See page 2-8.)
Only one original sheet can be sent when scanning original
on the glass.
3Set the scanning conditions. ( See pages 2-10 to
2-15.)
4Press the key in the Control Panel.
You can hear the monitor tone from the built-in speaker.
To cancel setting midway, press the key again.
6When you hear the answering tone output from the
built-in speaker after the connection is made with
the remote FAX, press the key.
:110
FEB25-2001 11:30AM M :100%
RESOLUTION:STANDARD :AUTO
5Dial the remote FAX number. ( See pages 2-16 to
2-21.)
You can specify only one destination.
Note
In case of Keypad Dialing, each press of a digital key dials a
number. So, if you make a mistake when dialing the remote
FAX number, press the key to cut the line, press the
key again and redial.
7Press the key. (Select 1.TRANSMIT).
For scanning on the glass, setting the original size is
required here. (e-STUDIO16 only. See page 2-14.)
COMMUNICATING SETTING
1.TRANSMIT
2.RECEIVE
DIAL TEL NUMBER:
FEB25-2001 11:30AM M :100%
RESOLUTION:STANDARD :AUTO
COMMUNICATING
JOB NUMBER :XXX
110
1Press the key.