1234567

You can customize your wash by adding options to your cycle selections. You can add or change an option after starting a cycle anytime before the selected option begins. Not all options are available with all cycles.

See the ?Laundry Guide? for an overview of possible options for each Wash Cycle selection.

You can select more than one option for a cycle. Some options cannot be added to some cycles; for example, Prewash cannot be added to the Rapid Wash cycle.

If an option is available with a selected cycle, the light for that

option will glow when selected.

8

 

If an option is unavailable with a selected cycle, there will be a short tone, and the light for that option will not glow when

234567selected.

Use this option for heavily soiled loads that need pretreatment. This option adds a 15-minute prewash and drain to the main wash123456cycle.

Add detergent to the Prewash and Main Wash compartments of the Dispenser Drawer.

When using Prewash, use powdered detergent for the Main Wash detergent compartment because liquid detergent will

123467seep into the washer during Auto Soak.

The Prewash and Auto Soak options cannot be selected 89￿￿￿￿￿5￿￿in the same cycle.

Use the Auto Soak option for loads of heavily soiled cotton, linen, polyester or nylon with set-in stains. During Auto Soak, water will be added to the drum and the laundry will be equally distributed by a short tumbling phase. Laundry will then be soaked by phases without drum movement. After soaking, the washer drains without spinning.

Add detergent to both the Prewash and Main Wash compartments of the Dispenser Drawer.

Use powdered detergent for the main wash cycle because liquid detergent will seep into the washer during Auto Soak.

For cycles with Hot Wash Temperatures, the Soak temperature is set to WARM. Otherwise the Soak temperature is the same as the Wash Temperature.

The Auto Soak and Prewash options cannot be selected in

￿￿￿25￿￿￿￿63the same cycle.

8

An extra rinse can be used to ensure the removal of detergent or bleach residue from garments. This option provides an additional rinse￿￿￿63￿￿￿￿￿with the same water temperature as the first rinse.

95￿4￿4￿￿7

Preset cycle settings of Soil Level (cycle time), Water Temperature, and Spin Speed can be changed. You can change a modifier after starting a cycle anytime before the selected modifier begins. Not all modifiers are available with all cycles and options.

To change the water temperature, select the WATER TEMP button until the desired setting glows.

To change the spin speed, select the SPIN SPEED button until the desired setting glows.

To change the loudness of the Cycle End Signal, select

(ADJUSTABLE) CYCLE END SIGNAL.

￿567￿￿￿￿63￿￿3￿￿9￿￿789￿￿￿73￿￿To change cycle￿￿￿9￿￿￿￿5￿￿￿￿￿￿￿￿7￿9￿￿￿￿￿time, select SOIL LEVEL button.

Select a water temperature based on the type of load you are washing. Use the warmest wash water safe for fabrics. Follow garment label instructions.

Warm rinses leave the loads dryer than cold rinses. Warm rinses increase wrinkling. In cold climates, a warm rinse makes the load ￿3￿￿325￿923￿￿93more comfortable to handle. Cold rinses save energy.

89￿￿￿5￿￿￿￿￿3￿￿325￿923￿￿￿￿￿2￿￿5￿￿4￿7￿23 Sturdy colorfast fabrics

1234567345898983￿66￿￿9349￿￿￿3￿￿9￿58￿￿￿6￿￿￿9635!3"93Heavy￿￿387523##￿￿￿￿soils￿￿￿838￿3￿39￿￿￿￿￿￿￿￿￿￿9￿33￿989￿￿92863

Whites and pastels

8￿￿￿ Heavy soils

Bright colors

Moderate to light soils

Colors that bleed or fade

Light soils

The automatic temperature control electronically senses and maintains a uniform water temperature. Automatic temperature control regulates incoming hot and cold water. Automatic temperature control is automatically turned On when a cycle is selected. See ?Preset Cycle Settings? in ?Cycles.?

Automatic temperature control works for all wash and rinse temperature settings.

3-12

Page 29
Image 29
Whirlpool MFW 9600S, MFW 9700S manual 1234567, Sturdy colorfast fabrics