REMOVING THE PRESSURE SWITCH
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1.Unplug washer or disconnect power.
2.Turn off the water supply to the washer.
3.Remove the top cover and the console (see page
Pressure Switch
4.Pull the pressure hose off the pressure switch inlet.
5.Press on the two locking arms at the bottom of the wire connector, and pull the connector off the pressure switch termi- nals.
Wire Connector
Pressure Hose
6.Pry the standoff on the wire channel out of its chassis mounting hole.
7.Turn the pressure switch 90 degree coun- terclockwise so that the square locking tab is aligned with the chassis cutout. Pull the tab out of the cutout, and remove the switch.
Wire Channel
Rotate 90 degree⋅
CCW
