REMOVING THE CONSOLE AND THE TOUCHPAD / LED ASSEMBLY

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1.Unplug washer or disconnect power.

2.Turn off the water supply to the washer.

3.Remove the three T-20 hex-head torx screws from the top cover of the washer.

4.Pull back on the cover and release the tabs in the console from the slots in the cover, then lift the cover off the unit.

Console

Tabs

Top Cover Screws

5.To remove the console:

a)Lift the locking tab and disconnect the ribbon cable connector from the cen- tral control unit.

b)Remove the ribbon cable from the five clips.

Touchpad/LED

Ribbon Cable

5 Clips

Connector @ DS3

c)Pull the detergent dispenser drawer out as far as it will go, then press down on the release tab, and remove the drawer from the unit.

Release Tab

Detergent

Dispenser

Drawer

4-2

Page 37
Image 37
Whirlpool MFW 9600S, MFW 9700S manual Removing the Console and the Touchpad / LED Assembly, To remove the console