d)Remove the
Console Screw
e)Press the locking tab on the right rear side of the console, and pull out on the console to disengage the tab from its slot.
Console Locking Tab
f)Pull out at the bottom of the console and lift it to unhook the top edge from the cabinet, and remove the console.
Pull Out
6.To remove the touchpad / LED assem- bly:
a)Use a small screwdriver and unsnap the three top locking tabs from the touchpad/LED assembly.
b)Starting from the right, unsnap the four lower locking tabs from the touchpad/ LED assembly, and lift the assembly from the console. NOTE: If the push- buttons are attached to the assembly, unsnap them from the old assembly, and install them on the console at their correct locations.
Touchpad / LED Assembly
Top 3 Locking Tabs
Lower 4 Locking Tabs
Touchpad / LED Assembly
FRONT VIEW
Touchpad / LED Assembly
BACK VIEW
