d)Remove the motor and switch wires from the wire clip.

e)Disconnect the two wire connectors from the motor terminals. NOTE: The connector with the blue stripe (motor connector) is installed above the con- nector with no color indicator (dispenser switch connector).

Motor (Blue

Stripe)

Disp. Sw.

 

(No Color)

Wire Clip

 

5.To remove the detergent dispenser as- sembly:

a)Remove the front panel from the washer (see pages 4-4 and 4-5 for the proce- dure).

b)Remove the detergent dispenser mo- tor (see step 4).

c)Use a small screwdriver and raise the locking arm so that it clears the tab. Pull the inlet hose connector and rub- ber o-ring out of the detergent dis- penser.

d)Loosen the clamp and pull the tub hose from the detergent dispenser.

e)Remove the main inlet tube from the bellows.

f)Remove the two screws from the de- tergent dispenser and remove the dis- penser from the washer.

Tab

Rubber O-Ring

Locking Arm

Tub Hose

Detergent

Dispenser

Screws

Main Inlet

Tube

4-9

Page 44
Image 44
Whirlpool MFW 9700S, MFW 9600S manual To remove the detergent dispenser as- sembly