REMOVING THE DETERGENT DISPENSER
MOTOR & ASSEMBLY
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1.Unplug washer or disconnect power.
2.Turn off the water supply to the washer.
3.Remove the top cover and the console (see page
4.To remove the detergent dispenser motor:
a)Unhook the spring from the end of the water distribution lever.
b)Carefully pull the cam actuator and the water distribution lever off the motor shaft, then pull the water distribution lever off the lever connection pin.
Disconnect
Spring
Pull Off Shaft
|
| Cam |
Remove |
| |
| Actuator | |
From Pin |
| |
|
| |
|
|
|
Water
Distribution
Lever
c)Remove the two motor screws and remove the motor from the detergent dispenser.
Detergent Motor
Dispenser
Motor Screws
