Whirlpool MFW 9600S, MFW 9700S manual Removing the Airtrap

REMOVING THE AIRTRAP

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1.Unplug washer or disconnect power.

2.Turn off the water supply to the washer.

3.Pull the washer away from the wall so that you can access the rear panel.

4.Remove the twelve T-20 hex-head torx screws from the rear panel and remove the panel from the washer.

Airtrap

5.Pull the pressure tube off the airtrap fitting.

6.Remove the T-10 torx screws from the airtrap.

7.Press the locking arm to unlock the airtrap and pull it back and off the tub. NOTE: Replace the rubber o-ring if it is cracked or worn.

Rear Panel Screw (1 of 12)

4-18