13.Remove the screw from the green ground wire eyelet and remove the wires from the clips in the tub.
Ground Screw
Unhook Ground Wire
14.Remove wire ties at the front of the tub, by pulling the wire ties out of the standoffs.
Wire Ties (In Standoffs)
15.At the front of the washer, remove the six
Top Front Brace
IMPORTANT NOTE: When you remove the bottom front counterweight in the following step, be sure to support it with one hand while you remove the screws with the other hand; otherwise, the weight will fall, and could cause an injury or damage the floor covering.
16.While supporting the bottom front counter- weight with one hand, remove the three 1/2 inch
17.Remove the three 1/2 inch
Top Front Counterweight
SUPPORT WEIGHT WHILE REMOVING
Bottom Front
Counterweight
