Whirlpool MFW 9700S, MFW 9600S manual To remove the door lock/switch as- sembly, On the next

7.To remove the door lock/switch as- sembly:

a)Remove the bellows retaining wire (re- fer to steps 5 and 6 for the procedure).

b)Pull the bellows out and remove the three T-20 torx screws and flat wash- ers from the door lock/switch assembly.

Door Switch

(1 Screw)

Door Lock

Switches

(2 Screws)

8.To remove the front panel and bellows:

a)Remove the top cover and the console (see page 4-2 for the procedures).

b)Remove the bellows retaining wire (re- fer to steps 5 and 6 for the procedure).

c)Pull the bellows off the lip of the front panel.

d)Remove the door lock/switch assem- bly (see step 7).

Remove Bellows

From Panel Lip

c)Push the switch assembly out of the front panel and then slide the assem- bly tabs from the connector holder.

Switch Assembly Tabs

Connector

Holder

d)Disconnect the three wire connectors from the switch terminals and remove the assembly.

2-Wire	3-Wire	4-Wire
Connector	Connector	Connector

Door Lock/Switch Assembly

e)Close the washer door.

f)Remove the four T-20 hex-head torx screws from the top and bottom of the front panel and remove the panel from the unit.

Front Panel

Top Screws

Bottom Screws

4-5 Continued on the next page.