REASSEMBLY NOTES:
1.When reassembliing the tub, install the metal clips over the flanges of the two tub sections with a hammer.
3.When reinstalling the bottom front coun- terweight, first tape the flat nut in place in the tub slot so it does not fall out.
Tub Clamp
Tub Flanges
2.When reinstalling the tub assembly, hook the two suspension springs into the front holes of the tub and cabinet.
Front Slot |
| Front Slot |
|
|
|
Front Holes 
Bottom Front Counterweight Flat Nut
4. When reinstalling the heating element in the tub, make sure that it is held in place by the wire holder (see the photo in step 27 on the previous page).
Heating
Element 
