23.Lift the rear half of the tub off the front half.

24.Lift the basket from the front half of the tub.

Rear Half Of Tub

Basket

Front Half Of Tub

25To replace the heater element wire holder, remove the T-20 torx screw.

26.To replace the tub gasket, pry the gasket out of the slot and remove it. NOTE: The basket hub is molded into the rear half of the tub. If it is worn and needs to be replaced, you will need to replace the rear half of the tub.

Heating Element

Wire Holder

Basket Hub

Tub Gasket

4-27

Page 62
Image 62
Whirlpool MFW 9700S, MFW 9600S manual Rear Half Of Tub Basket Front Half Of Tub