Whirlpool MFW 9600S, MFW 9700S manual Door Lock/Switch Assembly Bellows Retaining Wire

REMOVING THE DOOR LOCK / SWITCH ASSEMBLY,

AND THE FRONT PANEL & BELLOWS

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1.Unplug washer or disconnect power.

2.Turn off the water supply to the washer.

3.Remove the top cover and the console (see page 4-2 for the procedures).

4.Remove the three T-20 hex-head torx screws from the toe panel and remove the panel.

5.Open the washer door.

Door Lock/Switch Assembly

Bellows

Retaining Wire

6.Starting at the bottom, use a small screw- driver, and pry the retaining wire from around the front of the bellows. NOTE: There is a tension spring at the bottom of the wire that can be separated to remove the wire.

Tension Spring

Toe Panel

Screws

4-4