Whirlpool MFW 9600S, MFW 9700S manual Removing the Interference Filter

REMOVING THE INTERFERENCE FILTER

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Replace all parts and panels before operating.

Failure to do so can result in death or electrical shock.

1.Unplug washer or disconnect power.

2.Turn off the water supply to the washer.

3.Remove the top cover and the console (see page 4-2 for the procedures).

Interference Filter

4.Disconnect the three connectors from the interference filter terminals. NOTE: The green 2-wire connector has a locking arm at the bottom that you must press to re- lease the connector.

5.Remove the two T-20 hex-head torx screws from the interference filter and remove the filter from the washer.

T-20 Torx Screws

2-Wire

ConnectorBlack White Wires

4-12