REMOVING THE INLET VALVES
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1.Unplug washer or disconnect power.
2.Turn off the water supply to the washer.
3.Remove the top cover and the console (see page
Inlet Valves
4.Disconnect the two wire connectors from the inlet valve terminals.
Disconnect
2 wire connectors
5.From behind the washer, remove the inlet valve screw, then slide the valves to the right and unhook them from the panel, and remove them.
Inlet Valve
Screw
Rear Of Washer
6.Loosen the clamp and disconnect the hose from the water valves.
Disconnect Hose
