|
|
| POSSIBLE CAUSE/TEST |
PROBLEM |
|
|
|
| NOTE: Possible Cause/Tests must be performed in the sequence shown for | ||
|
| ||
|
| each problem | |
|
|
|
|
|
|
|
|
|
|
|
|
|
| 1. | Unplug washer or disconnect power. |
|
| 2. | Check wire harness connections. |
|
| 3. | Check drain pump. |
WILL NOT DRAIN |
| 4. Check drain pump motor. | |
|
| 5. | Check that the drain hose and drain pump filter are clear of foreign objects. |
|
| 6. | Plug in washer or reconnect power. |
|
| 7. | Verify CCU operation by running a Diagnostic test or any cycle. |
|
|
|
|
|
| 1. | Remove shipping system. |
MACHINE VIBRATES |
| 2. | Check installation. |
|
| 3. | Check leveling feet. |
|
|
|
|
|
| 1. | Check that the inlet hoses are connected properly. |
|
| 2. | Unplug washer or disconnect power. |
INCORRECT |
| 3. | Check the water heater and wire harness connections to it. |
WATER |
| 4. | Check water temperature sensor for an abnormal condition (see “Water |
TEMPERATURE |
|
| Temperature Sensor”). |
|
| 5. | Plug in washer or reconnect power. |
|
| 6. | Verify CCU operation by running a Diagnostic test or any cycle. |
|
|
| |
DISPLAY IS |
| See “Failure/Error Display Codes.” | |
FLASHING |
|
|
|
|
|
|
|
