Xerox 2218 manual Change the Passcode, Fax Setup, Sys. Admin Tools, Reports, Off

01_UG.book Page 13 Wednesday, March 7, 2007 3:00 PM

Fax Setup	Protect All
	Allow All
	Allow Speed Dials
	Allow Group Dials
	Allow One Touch Keys
	Allow Phonebook Setup
Sys. Admin Tools	Protect All
	Allow All
Reports	Protect All
	Allow All
Off

Machine Administration

6	¾ To protect more Functions select [Yes], press [Enter] and repeat steps 4 and 5.
	To end, select [No] and enter the passcode.

7	¾ If you enabled Passcode Protection, refer to “Change the Passcode” starting on page 8-13
	to enter the new passcode.

Change the Passcode

This procedure is used to change an existing passcode or to enter a passcode after Passcode

Protect has been enabled.

1	¾ Press the [Machine Status] key.
2	¾ Using the Navigation Keys select [System Admin Tools] and press [Enter].
	¾ If the System Admin Tools have already been passcode protected, type in the password
	and press [Enter].
3	¾ Select [Change Passcode] using the Navigation Keys and press [Enter].
	¾ Enter the existing passcode and press [Enter].

)This will be blank if you have just enabled Passcode Protection

Xerox FaxCentre 2218 User Guide Page 8-13