Xerox 2218 Using the Bypass Tray, Paper Supply key until, Required tray is lit on the Status Map

01_UG.book Page 5 Wednesday, March 7, 2007 3:00 PM

7	¾ To select a paper tray, press the
	[Paper Supply] key until the

required tray is lit on the Status Map.

Tray 1 and the Bypass Tray are available as standard, Tray 2 is optional.

If two tray lights display together, the Auto Tray Switching feature is active. When one tray runs out of paper, the machine will switch to the other selected tray.

	Enter
Status Map

Paper Supply

Paper and Other Media

Using the Bypass Tray

The Bypass Tray is located on the right side of your machine. It can be closed when not in use, making the product more compact. Use the Bypass Tray to print transparencies, labels, envelopes or postcards in addition to making quick runs of paper types or sizes that are not currently loaded in the paper tray.

Acceptable print media is plain paper with sizes ranging from 98 x 148 mm (3.86 x 5.83 inch), to Legal size (216 x 356 mm / 8.5 x 14 inch) and weighing between 60 g/m² and 160 g/m² (16 lb and 43 lb).

The following table summarizes the print media allowed and the maximum stacking height for each paper type.

PAPER TYPE	MAXIMUM STACKING HEIGHT
Plain/Bond/Colored and Pre-	100 sheets or 9 mm (0.35 inch)
printed Paper
Envelope	10 envelopes or 9 mm (035 inch)
Transparency	30 sheets or 9 mm (0.35 inch)
Label	10 sheets or 9 mm (0.35 inch)
Cardstock	10 sheets or 9 mm (0.35 inch)

The height is measured with the stack of sheets laid on a flat surface.

Xerox FaxCentre 2218 User Guide Page 3-5