Xerox 2218 manual Polling, TX Poll, Batch TX

01_UG.book Page 15 Wednesday, March 7, 2007 3:00 PM

Polling	TX Poll	Use to store a document	¾ Press [Menu/Exit].	Fax
z Polling is used		on the machine ready to	¾ Using the Navigation Keys select [Fax Features]
		be polled by a remote fax
to retrieve		machine.	and press [Enter].
documents from			¾ Select [Polling] and press [Enter].
remote fax
machines.			¾ Select [TX Poll] and press [Enter].
Remote fax
machines can			¾ Enter a 4 digit Poll Code and press [Enter].
also poll your
machine.			¾ To store the originals in the Bulletin Board select
			[On]. If the Bulletin Board is not required, select
			[Off].
			¾ Press [Start]. The originals are scanned into
			memory ready to be polled.
	Delay RX	Use to retrieve a	¾ Press [Menu/Exit].
	Poll	document from a remote	¾ Using the Navigation Keys select [Fax Features]
		fax machine at a specified	and press [Enter].
		time.
			¾ Select [Polling] and press [Enter].
			¾ Select [Delay RX Poll] and press [Enter].
			¾ Enter the fax number using the Numeric Keypad a
			Phonebook entry or One Touch Key, and press
			[Enter].
			¾ The display shows the current time, enter a start
			time for the remote fax machine to be polled.
			Press [Enter] when the correct time displays.
			If you set a time earlier than the current time, the
			job will be sent at that time the following day.
			¾ Enter a 4 digit Poll Code and press [Enter].
			The machine will poll the remote machine at the
			specified time.
Batch TX	On	Activates the Batch TX	¾ Press [Menu/Exit].
z Use to send		feature.	¾ Using the Navigation Keys select [Fax Features]
faxes that are	Off	Deactivates the Batch TX	and press [Enter].
going to the		feature.	¾ Use the Navigation Keys to select [Batch TX] and
same location, in
one batch.			press [Enter].
			¾ Select [On] and press [Enter]. Enter a Batch
			Interval between 0 - 99 and press [Enter].

Xerox FaxCentre 2218 User Guide Page 4-15