01_UG.book Page 20 Wednesday, March 7, 2007 3:00 PM

Machine Administration

Dial Tone Detection (DT Detection)

This tool is used to allow the user to make the device check for a dial tone before sending a fax. The device will wait for a maximum of 10 seconds until a dial tone is detected. If a dial tone is detected, auto dial will start. If a dial tone is not detected, an error will be displayed and auto dial will not start.

Using DT Detection:

1

¾ Press the [Machine Status] button.

2

¾ Using the Navigation Keys select [System Admin Tools] and press [Enter].

¾ If the System Admin Tools have already been passcode protected, type in the password

 

and press [Enter].

3

¾ Select [DT Detection] and press [Enter].

¾ Select [On] using the navigation tools.

 

Page 8-20

 

 

Xerox FaxCentre 2218 User Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 166
Image 166
Xerox 2218 Dial Tone Detection DT Detection, ¾ Select DT Detection and press Enter, ¾ Select On using the navigation tools