Xerox 2218 manual Machine Setup Options, LTR / A4 / LGL / Folio, Off, 15 / 30 / 60, Seconds

01_UG.book Page 22 Wednesday, March 7, 2007 3:00 PM

Getting Started

Machine Setup Options

OPTION	SETTINGS		DESCRIPTION
Tray 1 Size	LTR / A4 / LGL / Folio	Use to set the default paper size for Tray 1.
		Paper Size options are Letter, A4, Legal (216 x
		356 mm / 8.5 x 14 inch) or Folio.
Tray 2 Size	LTR / A4 / LGL / Folio	Use to set the default paper size for Tray 2.
		Paper Size options are Letter, A4, Legal (216 x
		356 mm / 8.5 x 14 inch) or Folio.
Bypass Size	LTR / A4 / LGL / Folio /	Use to set the default paper size for the Bypass
	A5 / Statement	Tray. Paper Size options are Letter, A4, Legal
		(216 x 356 mm / 8.5 x 14 inch), Folio, A5 or
		Statement.
			If feeding media smaller than A4/Letter through
			the bypass tray, the setting can remain set at
			A4, Letter or Legal size.
			When copying onto a paper size smaller than
			A4/Letter, the printed image may be offset and
			not reproduce correctly, even when Auto Fit is
			selected.
Collated	On	Use to produce sets in the order 1,2,3 / 1,2,3 /
		1,2,3.
	Off	Use to produce stacks in the order 1,1,1 / 2,2,2
		/ 3,3,3.
Power Save	On	Use to enable the Power Save feature. If On is
		selected, set the period of time the machine
	Off
		waits before Power Save is activated. Choose
		between 15, 30, 60, 120 minutes.
Machine Time Out	15 / 30 / 60 / 180	Sets the number of seconds the machine
	Seconds	remains idle before the current job settings are
		reset back to the default settings. Use Off to
	Off
		deactivate the option.
Stamp RX Name	On	Set to On to enable sender information, the
		machine Fax Id, the page number, the date and
	Off
		time of reception and the reduction rate of the
		image to be printed on each page of each
		received transmission. The information is
		printed on the bottom edge of each page.

Page 2-22 Xerox FaxCentre 2218 User Guide