Xerox 4510/4510ps manual Control of the resumption of printing after system, Two examples are

			S y s t e m M e n u
Figure 3.20 System Menu options showing factory settings (continued)
Option	Setting		Description
Auto Continue	Off*	Control of the resumption of printing after system
	On	errors occur.
		Certain errors may occur that halt printer operations.
		Two examples are:
		Out of Memory
		and
		Page Too Complex.
		When Auto Continue is Off, the printer does not
		automatically resume. Enter		must be pressed
		before normal printer operations can continue.
		When Auto Continue is On, the printer automatically
		resumes operation after certain system errors if
		Enter	is not pressed within ten seconds. The
		On setting is useful in a networked environment.
Print Density	0 - 4 (2*)	Darkness of the print.
Note: This option is		0 is the lightest and 4 is the darkest.
available for firmware		A darker print density uses more toner and may
release 4.0 only. To
determine the firmware		reduce the life of the EP cartridge.
release of your printer,
print a Configuration
Sheet.

C h a p t e r 3 : U s i n g t h e C o n t r o l P a n e l ❖ 3-59