Xerox 4510/4510ps Both horizontal and vertical folds, Should fall within plus or minus two, Lines

			P r i n t Q u a l i t y P r o b l e m s
Figure 7.5 Print Quality Problems (continued)
Problem	Possible Causes		Corrective Actions
Image misregistration	1. Paper improperly loaded into	1.	Check trays for proper paper loading
The printed image is	paper tray		(see Chapter 2).
	2. Wrong paper size for	2.	Check paper stock and printer
mispositioned on the
page.	application		configuration.
		3.	If problem is not resolved, contact your
			dealer or Xerox / Rank Xerox.
		Produce a Test Print (see Chapter 3)
		•	Fold and crease the Test Print as shown.
		•	Both horizontal and vertical folds
			should fall within plus or minus two
			lines.
		If the pattern registers OK, the problem may
		be in your software application.

Damaged prints	1.	Poor paper condition	1.	Inspect/replace paper stock.
Prints are wrinkled,	2.	Paper improperly loaded into	2.	Check trays for proper paper loading
creased, or torn.		paper tray		(see Chapter 2).
	3.	Obstructed paper path	3.	Inspect paper path for obstructions
				(torn pieces of paper, etc.).
	4.	Defective Fuser Module	4.	Contact your dealer or Xerox / Rank
				Xerox.

C h a p t e r 7 : T r o u b l e s h o o t i n g ❖ 7-35