Xerox 4505/4505ps, 4510/4510ps manual You have a lower base installed. You want to load as much

S e l e c t i n g a P a p e r S o u r c e

To avoid a paper jam, do not remove the standard or lower

!tray while the printer is feeding paper.

Caution

Example 2	You have a lower base installed. You want to load as much
	paper in the printer as possible. You use only one size of
	paper. You do not do manual feeding.
	1.	Load the standard, lower, and MP trays with regular
		paper stock.
	2.	Set Source Mapping for “Standard” to “Low-Std-MP.”
	3.	Set MP Tray Size to the same size as the regular stock.
	4.	In either your software application or the Xerox printer
		driver, set paper source to the standard tray.

The printer will pull paper from the lower tray until it is empty, then from the standard tray until it is empty, then from the MP tray. When either the lower or standard tray is reloaded, the printer will pull paper from it again.

2-28❖ 4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ’ s G u i d e