Xerox 4510/4510ps, 4505/4505ps manual You do not have a lower base installed. You want to print

		S e l e c t i n g a P a p e r S o u r c e
Example 3	You do not have a lower base installed. You want to print
	mostly on Letter (8.5 x 11) paper but sometimes on Legal
	(8.5 x 14). You do not intend to do manual feeding.
	1.	Load the standard tray with Letter paper stock.
	2.	Load the MP tray with Legal paper stock.
	3.	Set Source Mapping for “Standard” to “Standard.”
	4.	Set Source Mapping for “Manual” to “MP Tray.”
	5.	Set MP Tray Size to “Legal (8.5x14).”
	6.	In either your software application or the Xerox printer
		driver, set paper source to:

— Standard tray for Letter pages.

— Manual (MP Tray) for Legal pages.

The printer will pull Letter paper from the standard tray. It will pull Legal paper from the MP tray.

Alternatively, you could set Source Mapping for “Standard” to “Standard-MP” and set your application paper source to the standard tray for both Letter and Legal size pages. The printer will automatically switch between the trays according to the paper size requested. The disadvantage is that Control Panel messages may be misleading. Whether alerting you to load Letter or Legal paper, the Control Panel will always display “Standard-MP” as the location to load that paper size. You must know which paper size goes into which tray.

C h a p t e r 2 : H a n d l i n g P a p e r ❖ 2-29