Xerox 4505/4505ps, 4510/4510ps manual Source Mapping, See Selecting a Paper Source

P C L M e n u

Figure 3.10 PCL Menu options showing factory settings (continued)

Option	Setting	Description
Source Mapping	Standard	Source mapping enables you to control from your
Options (Paper Sources):	MP Tray	software application the location from which the
	Standard-MP	printer pulls paper.
Standard	MP-Standard	Each of the six paper sources that can be requested
Manual	Lower†
		through your application maps to one of the Source
Manual Envelope	Standard-Lower†
		Mapping settings.
Lower	Lower-Standard†
Large Capacity	Lower-MP†	Standard is the factory setting for the Standard,
Envelope Feeder	Std-Low-MP†	Lower, and Large Capacity paper sources. MP Tray is
	Low-Std-MP†	the factory setting for Manual, Manual Envelope, and
	MP-Lower†	Envelope Feeder. See Figure 2.12 (page 2-26)for
	MP-Std-Low†	factory settings with and without a lower base
	MP-Low-Std†	installed.
		When a paper source (e.g., Standard) is mapped to a
		sequence of trays (e.g., Standard-MP), the printer may
		switch between them for two purposes:
		1) To increase paper capacity.
		When the current tray becomes empty, the
		printer automatically switches to the next tray in
		the sequence, provided the paper size is the
		same.
		2) To search for the correct paper size to print a
		page.
		If the paper size specified in your software
		application does not match what is loaded in the
		current tray, the printer automatically searches
		the next tray in the sequence for a paper size that
		matches.
		For more information on taking full advantage of
	† Appears only when an	Source Mapping and for detailed examples of usage,
		see “Selecting a Paper Source” (page 2-22).
	optional lower base is
	installed.

3-22❖ 4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ’ s G u i d e