Xerox 4510/4510ps, 4505/4505ps manual Mostly on white A4 paper but sometimes on pre-printed A4

S e l e c t i n g a P a p e r S o u r c e

display “Lower-Standard” as the location to load that paper size. You must know which paper size goes into which tray.

Example 5	You do not have a lower base installed. You want to print
	mostly on white A4 paper but sometimes on pre-printed A4
	paper. You occasionally print on DL envelopes.
	1.	Load the standard tray with white A4 paper stock.
	2.	Load the MP tray with pre-preprinted A4 paper stock
		(face down).
	3.	Set Source Mapping for “Standard” to “Standard.”
	4.	Set Source Mapping for “Manual” and “Manual
		Envelope” to “MP Tray.”
	5.	Set MP Tray Size to “A4 (210x297)”
	6.	In either your software application or the Xerox printer
		driver, set paper source to:
		— Standard tray for white A4 pages.
		— Manual (MP Tray) for pre-printed A4 pages.
		— Manual (MP Tray) for DL envelopes. (You could have
		also set paper source to Manual Envelope for DL
		envelopes.)
	The printer will pull white A4 paper from the standard tray. It
	will pull pre-printed A4 pages from the MP tray. For each DL
	envelope, the printer halts and the Control Panel displays a
	message requesting a DL envelope to be loaded in the MP
	tray. Remove the pre-printed paper and place one envelope
	in the MP tray. Press Enter		to print.

Additionally, you might set Source Mapping for “Lower” and “Large Capacity” sources to “MP Tray” so that you could select the lower tray or large capacity for pre-printed paper if more convenient.

C h a p t e r 2 : H a n d l i n g P a p e r ❖ 2-31