Xerox 4510/4510ps, 4505/4505ps manual Xerox PCL 5e emulation Windows printer driver also has this

S e l e c t i n g a P a p e r S o u r c e

Example 7	You do not have a lower base installed. You want to use
	pre-printed stationery for the first page and regular stock for
	the other pages of your document. Your software application
	has the capability to ask for the first page of a document from
	a different source than the remainder of the document. The
	Xerox PCL 5e emulation Windows printer driver also has this
	capability. It is assumed your pre-printed stationery is the
	same size as your regular stock.
	1.	Load the standard tray with regular paper stock.
	2.	Load the MP tray with pre-printed stationery (face down).
	3.	Set Source Mapping for “Standard” to “Standard.”
	4.	Set Source Mapping for “Lower” to “MP Tray.”
	5.	Set MP Tray Size to the same size as your pre-printed
		stationery.
	6.	In either your software application or the Xerox PCL 5e
		emulation Windows printer driver, set paper source for
		the first page to Lower and set paper source for the
		remaining pages to Standard.

The printer will pull the first page from the MP tray and all other pages from the standard tray.

Alternatively, you could substitute any paper source, except standard, for “Lower” in the fourth and sixth steps above.

Refer to the Document Services for Printing Guide for more information about the printer driver.

Note

C h a p t e r 2 : H a n d l i n g P a p e r ❖ 2-33