Xerox 4505/4505ps State Saving, Protection or Resolution, Temporary fonts and macros are always

P C L M e n u

Figure 3.10 PCL Menu options showing factory settings (continued)

Option	Setting	Description
State Saving	Off*	Reserves memory for saving permanently downloaded
	On	fonts and macros, when the printer switches from
		using the PCL printer language to using the PostScript
		printer language, or when the printer steps down in
		Page Protection or Resolution.
		When Off, all permanently downloaded fonts and
		macros are cleared from memory when switching
		PDLs. They must be downloaded again when the
		printer switches back to PCL from PostScript.
		When On, permanently downloaded fonts and
		macros are stored in printer memory. You eliminate
		the time to download them again when the printer
		switches back to PCL.
		Temporary fonts and macros are always
		cleared at the end of every print job.
		Note
		State Saving requires 10 MB (MegaBytes) of memory
		if the PostScript option is installed. If the PostScript
		option is not installed, State Saving may be selected
		with less than 10 MB. This will prevent loss of
		downloaded PCL fonts and macros if applications
		change the setting of Resolution or Page
		Protection. Enabling State Saving can have an
		effect on printing speed with minimum memory
		installed. It is recommended that this option not be
		enabled without 10 MB of printer memory.

3-28❖ 4 5 0 5 / 4 5 0 5 p s o r 4 5 1 0 / 4 5 1 0 p s U s e r ’ s G u i d e